Review of Domestic Research on Smart Manufacturing Technologies

Jong-Kyung Park, Tai-Woo Chang

Abstract


Recently, countries are pursuing vigorous research, development and commercialization in cooperation with industry, academia and researcher to take the lead in building a smart manufacturing system that is at the center of the fourth industrial revolution. According to a research report [4], the competitiveness of Korea in the area of basic technology, hardware, and software of the smart factory is reported to be less than 70% of the developed countries. In this study, we reviewed the existing research literature and analyzed the current status of smart manufacturing technology and major issues in the manufacturing industry. We tried to provide ideas for collaboration with core technology researchers and companies with business processes. Internet of Things, CPS and robot technologies have been the most active in smart manufacturing area. It can be seen that cooperation between researchers and industries in the early stage is being done through the case of industry application of each core technology.


Full Text:

PDF

References


Ahn, G. and Hur, S., “Survey on Cloud Manufacturing: Focusing on the Operational Process,” Journal of the Korean Institute of Industrial Engineers, Vol. 43, No. 6, pp. 422-434, 2017.

Chang, T. and Yang, H., “Latent semantics analysis of research papers on smart factory”, ICIC Express Letters, Vol. 11, No. 4, pp. 899-904, 2017.

Choi et al., “A study of Big-data analysis for relationship between students,” Journal of Information and Security, Vol. 16. No. 5, pp. 87-93, 2016.

Choi, Y. and Choi, S., “A Study on the Factors Influencing the Competitiveness of Small and Medium Companies Applied with Smart Factory System,” Information Systems Review, Vol. 19, No. 2, pp. 95-113, 2017.

Heo, H. and Song, J., “Artificial Landmark based Pose-Graph SLAM for AGVs in Factory Environments,” Journal of Korea Robotics Society, Vol. 10, No. 2, pp. 112-118, 2015.

Hwang et al., “Analysis of IoT Usage in Korean Key Manufacturing Industries,” The Journal of Society for e-Business studies, Vol. 21, No. 4, pp. 81-93, 2016.

Hwang, D. and Kim, J., “Low-weight Secure Encryption Protocol on RFID for Manufactory Automation,” Journal of Information and Security, Vol. 16, No. 7, pp. 173-180, 2016.

International Comparison of R&D Status of the Fourth Industrial Revolution Industry, Hyundai Research Institute VIP Report, No. 17-29, 2017.

Jeon, I. and Kang, S., “CPS-based Smart Factory Technology for Cyber-Physical Factory Interconnection,” Information and Communications Magazine, Vol. 33, No. 11, pp. 8-15, 2016.

Jun, C., Kim, B., and Lee, J., “A Big Data Analysis Platform based on the Manufacturing Specialized Library: A Case Study on Implementation of the Platform for Quality Problems,” Journal of the Korean Institute of Industrial Engineers, Vol. 43, No. 5, pp. 380-387, 2017.

Jung, H., 3R in Industry 4.0, Proceeding on the 2017 Conference of the Korean Reliability Society, pp. 95-95, 2017.

Kang et al., “Development of Multi-Pass Automatic Welding Technology for Thick Plates using Small Robot,” Proceeding on the 2017 Conference of the Korean Welding and Joining Society, 2015.

Kang, H. and Noh, S., “Research Trends of Main Smart Manufacturing Technologies,” IE Magazine, Vol. 23, No. 1, pp. 24-28, 2016.

Kim et al., “A Study on Manufacturing System Integration with a 3D printer based on the Cloud Network,” Journal of the korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 15-20, 2015.

Kim et al., “Strength Analysis of LCD Transfer Robot Planetary Gear,” Journal of the korean Society of Manufacturing Process Engineers, No. 10, p. 66, 2017.

Kim, B., “A Internet of Things(IoT) based exploration robot design for remote control and monitoring,” Journal of Digital Convergence, Vol. 13, No. 1, pp. 185-190, 2015.

Kim, J. and Jin, S., “A Design for Realtime Monitoring System and Data Analysis Verification TA to Improve the Manufacturing Process Using HW-SW Integrated Framework,” KIPS Tr. Software and Data Eng., Vol. 4, No. 9, pp. 357-370, 2015.

Kim, J. and Jin, S., “Information Visualization for the Manufacturing Process Optimization Based on Design of Experiment and Data Analysis,” KIPS Tr. Software and Data Eng., Vol. 4, No. 9, pp. 393-402, 2015.

Kim, J., “A Smart Home Prototype Implementation Using Raspberry Pi,” The Journal of the Korea Institute of Electronic Communication Sciences, No. 10, pp. 1139-1144, 2015.

Kim, J., Choi, S., Chi, S., and Yoo, K., “Visualization of Big Data Analysis Results Connecting to Database,” Journal of the Korean Society for Big data Service, Vol. 2, No. 1, pp. 1-10, 2015.

Kim, Y., “Innovation of Welding Process by IoT Technology,” Proceeding on the 2017 Conference of the Korean Welding and Joining Society, pp. 49-53, 2017.

Lee et al., “Big-data Analytics Solution for Smart Manufacturing,” IE Magazine, Vol. 23, No. 4, pp. 28-34, 2016.

Lee, E., “The Fourth Industrial Revolution and Changes in the Industrial Structure,” Information and Communications Policy, Vol. 28, No. 15, pp. 1-22, 2016.

Lee, H. and Oh, J., “Design and Implementation of a Small Server Room Environment Monitoring System by Using the Arduino,” Journal of the KIECS, Vol. 12, No. 2, pp. 385-390, 2017.

Lee, H., “Embedded System Framework and Its Implementation for Device-to- Device Intelligent Communication of Manufacturing IoT Device considering Smart Factory,” Journal of Korean Institute of Intelligent Systems, Vol. 27, No. 5, pp. 459-465, 2017.

Lee, W., “Governmental policies of science and ICT in response to the Fourth Industrial Revolution,” Proceeding on 2017 Fall conference of the Korean Institute of Surface Engineering, 2017.

Lee, Y., “Development of Smart Garden Control System Using Probabilistic Filter Algorithm Based on SLAM,” Journal of the KIECS, Vol. 12, No. 3, pp. 465-470, 2017.

Lim, J., “Global R&D Trend and Challenges in Artificial Intelligence SW,” The Journal of Korean Institute of Next Generation Computing, pp. 33-46, 2016.

Noh, S. and Kim, Y., “Optimization Model for the Mixing Ratio of Coatings Based on the Design of Experiments Using Big Data Analysis,” KIPS Tr. Comp. and Comm. Sys., Vol. 3, No. 10, pp. 383-392, 2014.

Noh, S., “Smart Factory and Cyber-Physical System Techology,” Information and Communications Magazine, Vol. 33, No. 11, pp. 3-7, 2016.

Park et al., “Design and Manufacturing of the hand orthosis using 3D printing,” Proceeding on 2016 Conference of the Korea Society of Manufacturing Technology Engineers, p. 1, 2016.

Park, J., Lee, A., and Kim, T., “Implementation of High Speed Big Data Processing System using In Memory Data Grid in Semiconductor Process,” J. Korea Inst. Intell. Transp. Syst., Vol. 15, No. 5, pp. 125-133, 2016.

Ryu, G., “Convergence Research for Implementing NC Postprocessor Based Cloud Computing,” Journal of the Korea Convergence Society, Vol. 7, No. 1, pp. 17-23, 2016.

Shin, D., Human-centered Robotics: A New Concept for Manufacturing Robots, Proceeding on the 2014 Conference of the Korean Society for Precision Engineering, 2014.

Son, J. and Lee, K., “A Study on Factors Affecting Intention to Introduce 3D Printing in Manufacturing Area,” Proceeding on 2015 Spring Conference of the Korea Society of Management Information Systems, pp. 63-68, 2015.

Yoon, J. and Park, T., “Trends and prospects of Manufacturing innovation by CPS and IoT Technologies,” Information and Communications Magazine, Vol. 33, No. 11, pp. 23-28, 2016.

Yun, H. and Kim, H., “Circuit fabrication development technology by using a 3D printing Jetting Technology,” Proceeding of 2016 Fall Conference of the Korean Society of Manufacturing Process Engineers, p. 75, 2016.


Refbacks

  • There are currently no refbacks.